Ansible manages Alpine through a CLI, a YAML playbook, and a Python-bootstrap dance the target never asked for. Reemote is a Python **library* that configures Alpine over a plain shell — apk and OpenRC included — and hands you the result as data you can await, inspect, and test. The whole thing runs in a throwaway container in under a minute.*

The problem: configuration management on Alpine

Alpine runs the world's containers, a lot of its edge boxes, and every minimal VM someone cared enough to slim down. It is not Debian and not RHEL, and three things make it its own animal:

  • apk (Alpine Package Keeper), not apt or dnf.
  • OpenRC, not systemd. A service is an /etc/init.d script managed at runtime with rc-service; a runlevel is a directory of symlinks under /etc/runlevels managed with rc-update.
  • musl libc and a deliberately minimal userland — a fresh Alpine ships no Python at all.

That last point is where Ansible hurts first. Ansible executes by pushing modules to a Python interpreter on the managed node. Every mainstream distro already has one; Alpine does not. So the very first task of every Alpine playbook is a bootstrap you would never need anywhere else — the one module that does not require Python, raw, sneaking an interpreter onto the box so Ansible can then talk to it:

- name: Install Python 3 on Alpine # a whole task just to make Ansible work  ansible.builtin.raw: test -x /usr/bin/python3 || apk add --no-cache python3

Everything after that is a translation layer. community.general.apk for packages. ansible.builtin.service quietly becoming rc-service/rc-update behind your back. lineinfile edits to /etc/apk/repositories. It works — but you are describing a Python program's worth of logic in YAML, for a target you first had to bootstrap into having Python, driven by a CLI whose result is terminal output you scrape with a regex.

That is the gap: there is no serious configuration-management library you can import and point at an Alpine box.

Try it in under a minute (docker connector)

Reemote ships a docker connector that runs your deploy inside a local container, so you need neither a remote host nor an SSH key to see it work. You do need Docker or Podman installed locally — the connector shells out to whichever CLI you name, and there is no default. Three commands:

# 1. install reemote into a fresh venv (Python 3.13+; pip works just as well as uv) uv venv .venv && source .venv/bin/activate && uv pip install reemote # 2. save the script below as alpine_demo.py # 3. run it — starts a throwaway alpine:3.20 container, configures it, cleans up python alpine_demo.py 
# alpine_demo.py import asyncio from reemote import apk, format_log, format_plan, op, run INVENTORY = [{ "host": "alpine-demo", "connection": { "connector": "docker", "identifier": "alpine:3.20", "docker_cmd": "podman", # or "docker" }, }] def deploy(host): # The first thing you always do on a fresh Alpine: install packages. yield op(apk.packages, name="Install baseline packages", packages=("chrony", "curl"), no_cache=True) async def main(): plans, report, _ = await run(INVENTORY, deploy) print("== Plan ==") print(format_plan(plans)) print("== Applied ==") if report is not None: print(format_log(report)) asyncio.run(main())

The most common first task after dropping onto a fresh Alpine is the one Ansible itself reaches for first: install packages with apk. Verified output:

== Plan == alpine-demo: Install baseline packages [changed: 2 package(s) to install] == Applied == alpine-demo: Install baseline packages [changed: 2 package(s) to install] $ apk add --no-cache chrony curl

Three things worth noticing, because they are exactly where Alpine + Reemote differ from Alpine + Ansible:

  • No Python bootstrap. Reemote talks to a shell over sshd (or docker exec), not to a Python interpreter on the target. The raw: apk add python3 task simply does not exist here. Under the hood that $ apk add ... line ran as podman exec -i <container> sh -c 'apk add --no-cache chrony curl' — the transport wrapping is invisible in the log by design, so the same deploy reads identically over SSH.
  • No -y, no sudo. apk never prompts, so reemote never adds a -y flag (unlike apt and dnf). And the container's exec user is already root, so nothing needed escalating. On a real Alpine host — which ships no sudo — you would flag the request doas=True and reemote would run a passwordless doas -n apk add ....
  • no_cache=True is an apk-native modifier. It renders --no-cache, the container-idiomatic "don't leave an index behind" flag. Reemote exposes apk's own vocabulary rather than flattening it into a lowest-common-denominator package API.

One honesty note, the same one the throwaway-container workflow always carries: every run reports [changed: ...], even the second time, because the image target starts a fresh alpine:3.20 container on each invocation, so the packages genuinely are absent each time. Point reemote at a stable target — an SSH host, or an existing container ID — and the second run correctly reports [no change: all packages present]. You will see exactly that below.

Why Python has real advantages over Ansible

Ansible chose YAML because it is readable and does not require knowing a programming language. That is a fair trade when your team does not write Python. When it does — and most automation teams today do — the trade costs more than it saves, and on Alpine the bill is higher still:

  • The target does not need Python. Ansible's whole execution model assumes an interpreter on the managed node. Reemote assumes a POSIX shell and sshd. On a minimal Alpine that is the difference between a bootstrap task and none.
  • Your editor knows your code. apk.packages and openrc.service are functions: go-to-definition, rename, autocomplete, and a type check that catches a typo before it reaches a production box. A misspelled YAML module name surfaces at runtime.
  • No Jinja2 as a second language. {{ hostvars[...] }} is a stringly-typed escape hatch that fights your IDE and your tests. In reemote the value is just a Python expression.
  • Composition is import, not directory layout. Roles load by convention; reemote deploys are generators you import, call, and loop over.
  • The result is data, not stdout. If your application needs to know what changed, you read report.entries[i].changed — you do not regex-scrape a terminal.
  • Testing is pytest. A deploy function is a pure generator; you can inspect the requests it yields without touching a server. No molecule, no testinfra, no ansible-lint.

The solution: Reemote is a library

Reemote is a Python package (pip install reemote) with two properties that separate it from every CLI-shaped tool.

Async end to end, on asyncssh

The transport is asyncssh, and the entire execution path — connecting, gathering facts, sending commands, closing — is coroutines. You await a deploy and hosts progress in parallel; network waits overlap across hosts while each host's commands stay in order. Your deploy script remains a plain synchronous generator, so you never write async inside an operation.

plans, report, hosts = await run(inventory, deploy)

run is the single entry point: it validates the inventory, opens connections lazily, plans and applies in two phases, then closes everything in a finally. The same code runs over SSH or over the docker connector — you pick the transport in the inventory entry, not in the deploy. That is why you can develop an Alpine role against a local container and ship it to a VM without changing a line.

A library returning structured results, not a CLI

run(...) returns (plans, report, hosts):

  • plans — {host_label: [PlannedOperation, ...]}, the proposed work per host.
  • report — an ApplyReport with a LogEntry per applied operation, each carrying changed, reason, and the exact commands sent. None when dry=True.
  • hosts — the materialised host objects.

format_plan and format_log (what you saw above) are convenience renderers for humans. Your application consumes the objects directly — no parsing stdout to figure out what happened.

The apk module: Alpine's package manager as Python

apk pairs read-only facts with operations that converge the box toward a described state. An operation reads a fact, decides whether anything must change, and yields commands only when it must — so re-running is a no-op.

Operations

  • apk.packages — install, upgrade, or remove by name. A name can be pinned <pkg>=<version>, and a pin counts as present only when that exact version is installed. present=False removes; latest=True upgrades unpinned names; no_cache/no_scripts are the apk-native --no-cache/--no-scripts modifiers. Idempotence reads ApkInstalledPackages.
  • apk.repository — ensure one line in /etc/apk/repositories. This is the day-one "enable the community repo" task, done as a spool-and-install rewrite of the file (never an in-place sed -i), so the other lines, comments, and ordering survive verbatim. A path parameter manages a non-standard repositories file.
  • apk.virtual — manage an apk virtual package group (apk add -t <tag> ...), the build-dependency pattern a compile step wraps itself in so its toolchain does not linger on the finished image; tear it down with one apk del <tag>.
  • apk.hold — pin packages back from upgrades. apk has no apt-mark hold; it holds by writing a version constraint into /etc/apk/world, and that is exactly what this does, with version-aware idempotence.
  • apk.autoremove — purge the orphaned packages nothing in world needs any more (apk add --purge). apk has no autoremove verb, so reemote splits the --purge flag into a standalone, separately-plannable step.

Facts — ApkInstalledPackages, ApkExplicitPackages (the world), ApkHeldPackages, ApkAutoremovablePackages, ApkRepositories, ApkRepositoriesFile, and ApkPackage (one package's version, size, dependencies, provides). Every list fact returns sorted, de-duplicated, JSON-printable typed entries — not a scraped string.

The openrc module: Alpine's init as Python

OpenRC manages services along two independent axes: whether a service is running right now (rc-service), and whether it is enabled in a runlevel at boot (rc-update). A service can be enabled but stopped, or running but not enabled. openrc.service handles both in one operation.

Operations

  • openrc.service — running=True/False/None compares OpenrcStatus and starts/stops only on a difference; enabled=True/False/None compares OpenrcEnabled for a runlevel (default "default") and yields rc-update add/del only on a difference; restarted=True/reloaded=True are the non-idempotent verbs, each gated on the service actually running.
  • openrc.runlevel — the dedicated runlevel-membership verb: assign or unassign a service without touching its runtime state.
  • openrc.custom_runlevel — manage the runlevel directories themselves, including stacking (rc-update -s add). Removal unstacks from every target first, then deletes the directory, so no dangling symlink survives.
  • openrc.config — set or unset one shell-variable assignment in /etc/rc.conf or /etc/conf.d/<service>, via the same spool-and-install rewrite as apk.repository.

Facts — OpenrcStatus (name → running bool), OpenrcEnabled (name → enabled-in-runlevel bool), OpenrcServices (the raw state word, so a crashed service is distinguishable from a stopped one), OpenrcRunlevels, OpenrcVersion, and OpenrcConfigFile.

One honest boundary: there is no openrc.mask. OpenRC has no masking mechanism (no systemd-style symlink-to-/dev/null), so reemote does not pretend to emulate one — disable the service in every runlevel instead.

Install OpenRC, then use it — self-contained and verified

The classic Alpine post-install move is install the daemon, then enable and start it — chrony for time sync, say. In reemote that is apk.packages followed by openrc.service. There is one wrinkle worth understanding first, because it is the two-phase model showing through:

You cannot install OpenRC and read OpenRC facts in the same deploy. run() gathers facts for every operation during the prepare pass, before the apply pass sends a single command. So a one-deploy apk.packages(("openrc", …)) → openrc.service(…) dies at plan time: openrc.service runs rc-status / rc-update show -v while OpenRC is not installed yet → exit 127 → CommandNotFoundError.

The fix is two run() calls — and the docker connector keeps it fully self-contained: no manual podman run, no custom Dockerfile. Run 1 installs OpenRC into a throwaway alpine:3.20 container; on close the connector commits that container into a new image and hands you its short ID as hosts[0].image_id. Run 2 targets that committed image, so OpenRC already exists when its prepare pass reads the facts:

# alpine_openrc.py import asyncio from reemote import apk, format_log, format_plan, openrc, op, run DOCKER_CMD = "podman" # or "docker" def conn(identifier): return {"host": "alpine-demo", "connection": {"connector": "docker", "identifier": identifier, "docker_cmd": DOCKER_CMD}} def bootstrap(host): # Run 1 -- install OpenRC itself. apk is in the stock image, so this # deploy's prepare stage gathers facts fine. On close the docker connector # commits the container into a new image, OpenRC baked in. yield op(apk.packages, name="Install openrc", packages=("openrc",), no_cache=True) def deploy(host): # Run 2 -- targets the committed image, so OpenRC already exists and this # prepare stage can read rc-status/rc-update without a CommandNotFoundError. yield op(apk.packages, name="Install chrony", packages=("chrony",), no_cache=True) yield op(openrc.service, name="Enable chronyd at boot", service="chronyd", running=None, enabled=True) async def main(): # Run 1: bootstrap OpenRC into a throwaway alpine:3.20 container. plans, report, hosts = await run([conn("alpine:3.20")], bootstrap) print("== Run 1: install OpenRC ==") print(format_plan(plans)) if report is not None: print(format_log(report)) # Chain: run 2 starts from the image run 1 committed. image_id = hosts[0].image_id print(f"(committed image: {image_id})") plans, report, _ = await run([conn(image_id)], deploy) print("== Run 2: install chrony + enable chronyd ==") print(format_plan(plans)) if report is not None: print(format_log(report)) asyncio.run(main())

Verified output (the committed image ID is ephemeral — yours will differ):

== Run 1: install OpenRC == alpine-demo: Install openrc [changed: 1 package(s) to install] alpine-demo: Install openrc [changed: 1 package(s) to install] $ apk add --no-cache openrc (committed image: 37a2428674df) == Run 2: install chrony + enable chronyd == alpine-demo: Install chrony [changed: 1 package(s) to install] alpine-demo: Enable chronyd at boot [changed: service chronyd is not enabled, will enable] alpine-demo: Install chrony [changed: 1 package(s) to install] $ apk add --no-cache chrony alpine-demo: Enable chronyd at boot [changed: service chronyd is not enabled, will enable] $ rc-update add chronyd default

Each operation prints twice — once from format_plan (the proposal), once from the format_log apply report (with the $ … commands actually sent). Within run 2 the ordering is the point: the apply phase runs in lockstep, one request index at a time across all hosts, so every host finishes the chrony install before any host begins the service step. openrc.service therefore always sees the /etc/init.d/chronyd script the install just delivered. There is no combined "ensure" operation to maintain — the halves compose, and each is idempotent against its own facts.

A throwaway image target starts fresh every time, so re-running the whole script always reports [changed: …]. Point run 2 at a stable target instead — an SSH host, or an existing container ID — and re-running it converges, which is the [no change: …] the quickstart could not show:

alpine-demo: Install chrony [no change: all packages present] alpine-demo: Enable chronyd at boot [no change: service chronyd is enabled]

Two Alpine-specific honesty notes:

  • The stock alpine image ships no OpenRC — rc-service/rc-update are absent until you apk add openrc, which is exactly what run 1 does. On a real Alpine VM or bare-metal box OpenRC is the init system and is always present, so there you skip the bootstrap run and keep only run 2.
  • running=True (an actual rc-service chronyd start) needs OpenRC to be PID 1, which a plain docker run ... tail -f /dev/null container is not. That is why this example uses running=None, enabled=True — the boot-assignment half (rc-update) is init-independent and works anywhere. On a real Alpine host, add running=True and reemote will start the daemon too.

On a real host both halves write root-owned state, so flag them doas=True: Alpine has no sudo, and reemote runs doas -n, which needs a permit nopass rule for your login user in /etc/doas.conf.

A day-one Alpine playbook, in Python

Here is the routine post-install set — the tasks an Alpine playbook always opens with — as one reemote deploy. No Python bootstrap, no YAML, no Jinja2:

def deploy(host): # (1) There is no "install Python so the tool works" step: reemote needs # only a shell + sshd on the target. # (2) Enable the community repository (spool-and-install rewrite of the file). yield op(apk.repository, name="Enable community repo", src="http://dl-cdn.alpinelinux.org/alpine/v3.20/community", doas=True) # (3) Time sync: install chrony, then enable and start chronyd. yield op(apk.packages, name="Install chrony", packages=("chrony",), doas=True) yield op(openrc.service, name="Run chronyd", service="chronyd", running=True, enabled=True, doas=True) # (5) Baseline daemons every Alpine box wants up and enabled. for svc in ("crond", "networking"): yield op(openrc.service, name=f"Ensure {svc}", service=svc, running=True, enabled=True, doas=True) # (6) Resolvers: a plain content install, mode enforced. yield op(files.install, name="Write resolv.conf", content="nameserver 1.1.1.1\nnameserver 8.8.8.8\n", dest="/etc/resolv.conf", mode="0644", doas=True)

Task (4), hardening sshd_config, is the one that shows off the library shape most. In Ansible it is a lineinfile plus a notify: restart sshd handler. In reemote it is files.edit (or files.transform) rewriting the PermitRootLogin line, and the "handler" is ordinary Python: run the config deploy, read its report, freeze the set of hosts that actually changed with reemote.handlers.changed_hosts, and feed that set into a second deploy that calls openrc.service("sshd", restarted=True). No notify keyword, no handler-ordering rules to memorise — just the structured result you already have.

What follows: Reemote can manage Alpine instead of Ansible

Once configuration management is a library, everything Python already has becomes available to your Alpine deploys:

  • Deploy from your application. await run(inventory, deploy) inside a FastAPI handler, a Celery task, a Python GitHub Action, or a REPL.
  • Compose with real code. Build the inventory from a database query; generate config text from a Pydantic model; share validation between the app and the deploy.
  • Test with pytest. Deploy functions are pure generators — assert on the requests they yield without a server in sight.
  • Consume structured results. report.entries[i].changed, .reason, .commands are data you can log, chart, feed to a webhook, or gate a rollout on.
  • Two-phase execution for free. Every run prepares then applies; dry=True is a real preview against live facts, not a simulation.
  • Same code over SSH or Docker. Flip the connector key and the identical deploy runs against an Alpine VM or a local container — test the role before you point it at production, or build an image from the same code that configures a host.
  • Handlers as ordinary Python. Read the first deploy's report, freeze the changed hosts, feed them into a second deploy. changed_hosts and restart_handler ship for the common case.

You can use reemote instead of Ansible whenever managing Alpine is part of a Python program rather than a shell command in a CI job — which, for most teams building products today, is the more natural shape. And on Alpine specifically, you drop the Python-bootstrap task entirely.

What Reemote is not

  • Not a deployment CLI. There is no reemote command; you write the script.
  • Not an inventory format. Inventory is a Python list of dicts — load it from JSON, YAML, a database, or write it inline.
  • Not a role ecosystem. Reemote ships modules for apk, openrc, apt, dnf, files, systemd, server, git, mysql, postgresql, iptables, firewalld, ufw, selinux, lxd, snap, flatpak, sysctl, gpg, and hardware — but there is no Ansible Galaxy equivalent.
  • Not a translation layer between OSes. Python does not make nginx installable by the same name on Alpine and Debian. You still pick the right module for the target — and on Alpine that means apk and openrc, which reemote ships as first-class citizens.

Try it

If you have ever wanted to describe an Alpine box's state in the same language as the rest of your stack — with imports, types, tests, and await, and without bootstrapping Python onto the target just to configure it — the docker quickstart at the top of this article is the whole onboarding. Give it a minute.