Hi everyone 👋
I am learning Python in an online class with Muthu Sir. Today was Day 10, and the topic was Looping. Sir asked us to write a blog every day, so here is what I learned today, in the same order Sir taught it.
1. The Problem: 300 Times?
Sir started with this:
print(1) print(1) print(1) Easy. Three lines, three outputs.
Then Sir asked: "What if I want to print 1 three hundred times?" 🤔
Should we type print(1) 300 times? No!
So Sir explained what looping really means:
Looping is not about what we are doing.
Looping is about how many times we are doing a particular activity.
2. Before the Code: The Mindset
Before writing any code, Sir talked about the mindset. I liked this part a lot.
- Looping is a choice. If you feel comfortable with it, it will open many doors:
- DSA → Looping
- Product-based companies → Looping
- Genius / Brilliant people → Looping
- Looping is like walking, cycling, drawing, swimming. Nobody is born with it. We learn it by practice.
- Don't compare yourself with others.
- Keep a free mind, and keep a pen and paper ready.
3. Ground Rules ✍️
These are the rules Sir gave us for solving any looping problem:
- Never say "I don't know."
- Say "Let me try."
- Don't think about the entire output.
- Think only about the very next step.
- If you feel it is necessary, introduce a variable.
Rule 3 and 4 are the most important for me. When I look at the full output, I get confused. When I think only about the next step, it becomes easy.
Sir also gave us a small puzzle: 1 3 7 12 19. What comes next? (Try it with pen and paper! 😉)
4. Step by Step: From Repeated Lines to a Loop
Step 1: The simple way
print("1 1 1 1 1") It works, but it is not a loop. It is just one big string.
Step 2: Introduce a variable (Rule 5!)
Sir added a count variable to remember how many times we printed:
count = 0 print(1) count = 1 print(1) count = 2 print(1) count = 3 print(1) count = 4 print(1) count = 5 Step 3: Make every line look the same
Before going further, Sir showed this small example:
amount = 10 amount = amount + 20 print(amount) # 30 👉 Python first calculates the right side (amount + 20), then stores the result in the left side (amount).
So instead of count = 1, count = 2, count = 3... we can write the same line every time:
count = 0 print(1) count = count + 1 # count = 1 print(1) count = count + 1 # count = 2 print(1) count = count + 1 # count = 3 Now every pair of lines is exactly the same. And when lines are the same, we can loop them! 🎉
Step 4: Say it in your own language first
Sir wrote the condition in Tamil first:
"எப்போதெல்லாம் count இன் மதிப்பு 5ஐ விடக் குறைவாக இருக்கிறதோ..."
(Whenever the value of count is less than 5...)
And that sentence becomes Python:
count = 0 while count < 5: print(1, end=' ') count = count + 1 Output:
1 1 1 1 1 💡 end=' ' prints a space instead of a new line, so all the 1s come in one line.
Tracking with pen and paper
Sir tracked the value of count in comments, step by step:
| Step | count | count < 5? | Prints |
|---|---|---|---|
| 1 | 0 | 0 < 5 ✅ | 1 |
| 2 | 1 | 1 < 5 ✅ | 1 |
| 3 | 2 | 2 < 5 ✅ | 1 |
| 4 | 3 | 3 < 5 ✅ | 1 |
| 5 | 4 | 4 < 5 ✅ | 1 |
| 6 | 5 | 5 < 5 ❌ | stop |
5. Let's Experiment: Change One Thing at a Time 🧪
This was the best part. Sir changed one small thing each time and asked us to guess the output before running it.
Try guessing before you read the answer!
Change 1: Start count from 1
count = 1 while count < 5: print(1, end=' ') count = count + 1 Output
1 1 1 1 → only 4 times (1, 2, 3, 4 are less than 5)
Change 2: Use <= instead of <
count = 0 while count <= 5: print(1, end=' ') count = count + 1 Output
1 1 1 1 1 1 → 6 times (0 to 5)
Change 3: Use > instead of <
count = 0 while count > 5: print(1, end=' ') count = count + 1 Output
Nothing! Is 0 greater than 5? No. So the loop never starts.
Change 4: count + 2 instead of count + 1
count = 0 while count < 5: print(1, end=' ') count = count + 2 Output
1 1 1 → count goes 0 → 2 → 4 → 6. Only 3 times.
Change 5: count - 1 instead of count + 1
count = 0 while count < 5: print(1, end=' ') count = count - 1 Output
Infinite loop! 😱 count goes 0 → -1 → -2 → -3... and -1 is less than 5, -2 is less than 5... so the condition is always true. It never stops. (Press Ctrl + C to stop it.)
6. What I Learned Today
- A loop answers "how many times?"
- First make every line look the same (
count = count + 1), then put it in awhileloop. - Say the condition in your own language first, then write it in Python.
- Don't think about the whole output. Think about the very next step, with pen and paper.
- Change one small thing and guess the output. This is the best way to really understand a loop.
Thank you, Muthu Sir, for teaching in such a simple way! 🙏
See you on Day 11! 🐍