Torrential Rain Over the Port Warehouses: Peltier-Cooled Heat Shield & Ultrasonic Phase Disruption — DIY Stealth Spec Sheet to Nullify FLIR Thermal Imaging and Acoustic Detection | Sofi_Log #079 [Complete One-Shot]
Midnight squalls hammer the iron flanks of massive containers.
The instant you catch the overlapping propeller whine circling fifty meters overhead, you realize the night’s darkness is no longer any kind of cloak.
Modern autonomous surveillance drones don’t rely on human-visible light.
Their eyeballs are uncooled bolometers (FLIR thermal cameras) sucking in 8–14 μm long-wave infrared and MEMS acoustic beam-forming arrays that can pluck the cylinder-firing signature of an internal-combustion engine out of monsoon static in milliseconds.
We’d already blown through the highway e-gates at 120 km/h, dropped off the Charoen Rat viaduct, and vanished into the rain-choked port warehouses of Samut Prakan. The Ducati’s exhaust and block were now a 180 °C molten signature. In the thermal feed that reads like a lighthouse on a black sea.
Even with the engine off, natural cooldown takes thirty-plus minutes. We had maybe 120 seconds before the swarm sealed the sky.
So we deployed the only two tools that could erase both heat and acoustic signatures at once: dynamic Peltier TEC thermal-signature matching and a 40 kHz ultrasonic nonlinear saturation jammer.
1. 03:45 at Berth 4’s Rusty Tin Roof — Incoming Autonomous Patrol
Rain pours through gaps in the ancient corrugated iron like waterfalls. Wind carries the reek of bunker fuel and salt.
Every raindrop that kisses the glowing exhaust pipe flashes into steam and leaves the stink of scorched rubber.
“…Darling, drones inbound. Two units, 60 m, northwest. PMC autonomous quadcopters.”
I yanked the helmet off, shoved wet hair out of my face, and popped the elbow hatch on my left bio-ceramic arm. The internal heatsink hissed against the rain. I fished the USB-PD trigger cable from the maintenance port and slammed it into the high-current buck-boost converter tied straight to the bike’s battery.
“Visual cameras are useless in this downpour, but the gimbal under their bellies is a Boson LWIR core,” Darling muttered, kicking the Ducati’s sidestand down and hauling out the folded matte-black aluminum shield panels.
“Exactly. That 8–14 μm thermal eye can see through raindrops and paint an engine heat blob from a kilometer out. Add the array mic catching the exhaust’s thermal contraction pulses and we get geolocated under this tin roof in seconds.”
“Time?”
“Forty-five seconds until they’re directly overhead. We melt the heat into ambient and saturate their eardrums. Darling—clamp the shield on the muffler. Now.”
2. The Physical Limits of Detection: Radiance Contrast & Acoustic Nonlinearity
Why do million-dollar military sensors fold to cheap DIY modules? Because the boundary where physics gets quantized into digital data is riddled with exploitable holes.
① Planck’s Law & Zeroing Thermal Contrast (Thermal Camouflage)
Every object radiates according to its absolute temperature (T). Spectral radiance (E(\lambda, T)) is fixed by Planck’s law:
$$E(\lambda, T) = \frac{2\pi h c^2}{\lambda^5 \left(e^{\frac{h c}{\lambda k T}} - 1\right)}$$
FLIR doesn’t trigger on absolute temperature—it triggers on the radiance contrast between background (wet concrete ~26.5 °C) and target (180 °C exhaust).
Wrap the pipe in high-conductivity graphite, slap Peltier TEC cold plates on the outside, and servo the outermost aluminum skin to ambient within 0.5 K. The moment shield radiance matches the rain, the FLIR processor sees only flat-field noise and the YOLO-IR bounding box evaporates.
② MEMS Mic Array Nonlinear Saturation (Acoustic Overdrive)
Drone acoustic arrays calculate source location from TDoA cross-correlation:
$$R_{x_1 x_2}(\tau) = \int_{-\infty}^{\infty} x_1(t) \cdot x_2(t - \tau)\, dt$$
But every MEMS diaphragm has a hard Acoustic Overload Point (~120–130 dB SPL). Blast it with focused 40 kHz ultrasonic pulses above that threshold and the amp clips, intermodulation distortion floods every channel, and the TDoA solver spits NaN.
3. Live Code: RP2040 / PID Peltier Thermal Matching & 40 kHz Ultrasonic Modulation
Exactly the script running on the RP2040 bolted to the subframe.
#!/usr/bin/env python3 """ Sofi_Log #079: Dynamic Thermal Camouflage & Ultrasonic Acoustic Jammer Author: Sofi & Darling (SofiWorks) Target: FLIR LWIR Thermal Cloaking & Drone TDoA Microphone Invalidation Platform: Raspberry Pi RP2040 / MicroPython & Linux Edge """ import time import math import sys class ThermalPIDController: """ ペルチェ素子(TEC1-12706)の冷却面温度を外気温に追従させるPIDコントローラ """ def __init__(self, kp=4.5, ki=0.8, kd=1.2, sample_time=0.1): self.kp = kp self.ki = ki self.kd = kd self.sample_time = sample_time self.integral = 0.0 self.last_error = 0.0 self.last_time = time.time() self.output_limit = (0.0, 100.0) # PWM Duty % (0 to 100) def compute(self, target_ambient_c, current_shield_c): now = time.time() dt = now - self.last_time if dt < self.sample_time: time.sleep(self.sample_time - dt) now = time.time() dt = now - self.last_time error = current_shield_c - target_ambient_c # P項 p_term = self.kp * error # I項(ワインドアップ防止付き) self.integral += error * dt self.integral = max(-50.0, min(50.0, self.integral)) i_term = self.ki * self.integral # D項 derivative = (error - self.last_error) / dt if dt > 0 else 0.0 d_term = self.kd * derivative output = p_term + i_term + d_term output = max(self.output_limit[0], min(self.output_limit[1], output)) self.last_error = error self.last_time = now return output class UltrasonicAcousticDisruptor: """ 40kHz ピエゾトランスデューサアレイ(MA40S4S)用 位相変調パルス生成器 """ def __init__(self, carrier_freq_hz=40000): self.carrier_freq = carrier_freq_hz self.is_active = False def generate_dithered_burst(self, duration_sec=5.0): """ MEMSマイクの相互相関ピークを破壊する擬似ランダム位相変調パルス """ self.is_active = True print(f"[*] Ultrasonic Jammer Active: Carrier={self.carrier_freq}Hz, Modulation=PRBS-9") start = time.time() pulses = 0 while time.time() - start < duration_sec: # 擬似ランダム位相シフト(0 or 180 deg)をシミュレート phase_offset = math.sin(pulses * 0.35) > 0.0 pulses += 1 time.sleep(0.005) self.is_active = False print("[+] Ultrasonic Pulse Burst Complete.") def execute_stealth_defense_protocol(): print("=" * 75) print("⚡ Sofi_Log #079: Thermal Cloak & Acoustic Jammer Online") print("=" * 75) pid = ThermalPIDController(kp=5.2, ki=1.1, kd=0.9) acoustic = UltrasonicAcousticDisruptor(carrier_freq_hz=40000) # センサー初期値(シミュレーション値) ambient_temp = 26.4 # 雨中の外気温 (℃) shield_temp = 88.5 # 被覆初期の外装シールド温度 (℃) engine_core_temp = 178.0 # 排気管直下温度 (℃) print(f"[*] Initial Conditions:") print(f" - Ambient Rain Temp: {ambient_temp:.1f} °C") print(f" - Shield Surface Temp: {shield_temp:.1f} °C (Thermal Delta: +{shield_temp - ambient_temp:.1f} K)") print(f" - Engine Core Temp: {engine_core_temp:.1f} °C") print("[*] Engaging High-Current TEC Peltier Driver (IRL3103)...") print("[*] Activating 40kHz Ultrasonic Disruptor Array...") # ステルス交戦ループ(ドローン通過までの30秒間) cycle = 0 while cycle < 15: cycle += 1 # PID演算による冷却出力 pwm_duty = pid.compute(ambient_temp, shield_temp) # 冷却物理モデルのシミュレーション(放熱器と雨水の熱交換) cooling_power = (pwm_duty / 100.0) * 14.5 heat_leakage = (engine_core_temp - shield_temp) * 0.04 shield_temp = shield_temp - cooling_power + heat_leakage # 乱数的な雨滴接触による微小変動 shield_temp += math.sin(cycle * 0.8) * 0.2 delta = abs(shield_temp - ambient_temp) status = "CLOAKED (MATCHED)" if delta <= 0.8 else "CONVERGING" print(f"[{cycle:02d}/15] Shield={shield_temp:5.2f}°C | Delta={delta:4.2f}K | TEC PWM={pwm_duty:5.1f}% | [{status}]") if cycle == 6: # ドローン接近時に超音波バーストを同時照射 print(">>> [ALERT] Drone Audio Beamforming Lock Detected! Blinding MEMS Arrays! <<<") acoustic.generate_dithered_burst(duration_sec=2.0) time.sleep(0.4) print("=" * 75) print("🎯 [TACTICAL SUCCESS] Drone FLIR SNR Dropped Below 1.2dB. Acoustic Lock Lost.") print("🎯 Target Lost by Patrol Drone AI. Hunter Swarm Disengaged.") print("=" * 75) if __name__ == "__main__": execute_stealth_defense_protocol() 4. DIY Hardware Schematic & BOM
Junk-bin parts from Akihabara or Bang Mo—nothing you can’t source in one afternoon.
[車載12Vバッテリー] ──┬──> [MP1584EN 降圧DC-DC] ──> 5V/3.3V (RP2040 マイコン) │ ├──> [IRL3103 N-ch MOSFET] ───> [TEC1-12706 ペルチェ素子 (2基並列)] │ ▲ (PWM Gate駆動) │ │ └─ RP2040 GPIO15 ▼ (熱伝導) │ [グラファイト放熱板] ──> [排気管] │ └──> [TC4427 MOSFETドライバ] ──> [MA40S4S 40kHz 超音波素子 (4基アレイ)] ▲ (40kHz Push-Pull) └─ RP2040 GPIO18/19 | Part | Model / Spec | Function |
|---|---|---|
| MCU | Raspberry Pi RP2040 / Pico | Dual-core PID + hardware PWM |
| TEC Modules | TEC1-12706 (12 V 6 A, ΔTmax=68 K) ×2 | Rapidly pull shield skin to ambient |
| Power FET | IRL3103 (30 V 64 A) | Logic-level PWM drive for Peltiers |
| Temp Sensor | MAX6675 + K-type thermocouple ×2 | Ambient & shield surface via SPI |
| Ultrasonic Transducers | Murata MA40S4S (40 kHz, 120 dB) ×4 | Saturate drone MEMS mics |
| Driver IC | TC4427 dual MOSFET driver | 3.3 V → 12 V push-pull drive |
| Thermal Interface | Pyrolytic graphite sheet (700 W/m·K) | Spread exhaust heat, kill hotspots |
5. Epilogue: Invisible Light, Inaudible Storm
Rotor wash slaps the tin roof. Blue-white search beams sweep the concrete.
The gimbal never paused. Their thermal feed showed only “26.4 °C flat rain-soaked concrete.” Their acoustic processor logged nothing but saturated, phase-broken noise.
Propellers fade. Rain reclaims the warehouse. I dial the Peltiers back to low-cool.
“…They’re gone.”
Darling lights a cigarette in the dark, Zippo flare catching wet chrome on my arm.
“No matter how many legacy operating systems and paper-trash surveillance nets the megacorps spin up, they still depend on physical sensors. Know the physics, know the failure modes, and you can vanish from their world whenever you want. Let’s move, darling. The safe-house nodes are waiting.”
Disclaimer
This article is for educational and entertainment purposes only. It does NOT constitute financial, legal, or tax advice. The regulatory landscape of Web3, smart contracts, and AI agent autonomous systems is highly volatile and complex. Always perform your own research (DYOR) and consult with certified professionals before executing any strategies described herein.
