Frontend
Fault-Geometry-Aware Control Allocation for Emergency Quadrotor Landing under Single-Motor Loss of Effectiveness
arXiv eess.SY0 views
arXiv:2611.08259v1 Announce Type: cross Abstract: Partial single-motor loss of effectiveness (LoE) changes the remaining control-authority geometry of a quadrotor and can change which control allocator performs best during emergency landing[cite: 11]. We compare three allocators in Crazyflie software-in-the-loop simulation: bounded weighted least squares (reported as PINV), a finite-candidate residual allocator (QP-lite), and the same residual allocator with scoring parameters tuned offline by the Cross-Entropy Method (CEM)[cite: 11]. For this study, fault geometry is represented by the known failed-motor index[cite: 11]. At $\eta=0.496$ remaining effectiveness, matched development trials select CEM for M1, M3, and M4 and PINV for M2; the M3 selection is a one-trial margin (29/30 versus 28/30)[cite: 11]. After freezing this routing map, the policy achieves 117/120 safe first-contact touchdowns on fresh seeds and 115/120 in a separate randomized-order integrated-supervisor evaluation[cite: 11]. For the critical M2/PINV branch, Firth regression gives a nominal $\eta_{50}\approx0.4956$ with a within-model 95% bootstrap interval of approximately [0.4955, 0.4956][cite: 11]. One-factor-at-a-time $\pm10\%$ plant perturbations shift $\eta_{50}$ by up to 0.05495 for thrust coefficient and 0.04974 for mass; the most frequent violated first-contact criterion also changes from vertical speed in many conditions to angular rate for mass -10% and thrust-coefficient +10%[cite: 11]. At fixed $\eta=0.496$, PINV has a higher M2 safe count than frozen CEM in 9/11 tested plant states and ties in 2/11; the two ties are both 0/30[cite: 11]. The experiments therefore distinguish motor-conditioned allocator selection from sensitivity to plant-model mismatch[cite: 11].
Source:https://arxiv.org/abs/2611.08259PreviousValue-oriented policy distillation for interpretable wind farm power controlNextA Multimodal Haptic Interface for Simultaneous Softness and Thermal Modulation
Related posts
We've Made Software More Powerful. Have We Made It Harder to Use?
0dev.to UX
Human in the Loop Is Not a Checkbox
0dev.to UX
My CI gate reported "passing" without ever checking anything
0dev.to GitHub
How to Calculate Sum, Average, and Min/Max in a CSV File (Without Excel)
0dev.to Data

I Built Two Complete Visual Themes for One Platform: Here's Why Dark Mode Isn't Enough
0dev.to Design
Tabs in One: reúne todas las pestañas de Chrome en una sola columna y libera RAM
0dev.to Productivity