An EV customer brought us a cold plate with internal channels and a leak that only showed up after the part got warm. At room temperature it held pressure. On their line, with coolant at operating temperature, a seam wept. It took us a while to accept that our pressure test was the problem, not the part.

The channels were machined and then closed with a cover. At room temperature the joint sat one way. Warmed up, the two materials grew at different rates and the seal opened a fraction. Our cold test never saw it.

A leak test at the wrong temperature is a comfortable lie

We now test these assemblies warm, or at least at a temperature close to what they will see in service. It sounds obvious once you have been burned by it. Before that batch, I would have told you a room-temperature pressure hold was good enough. I was wrong.

The other thing we changed was the sealing surface finish. A channel cover that looks flat can still have a tool mark that becomes a leak path when it expands. We finish the sealing land in one setup now so the flatness and the surface are made together, not in separate operations.

Fluid cavities are a different job from metal cavities

A cavity that holds air is one thing. A cavity that holds liquid under pressure and temperature cycling is another. The same machined shape can be perfect on the CMM and still fail in service because of how it was closed, cleaned or tested. We treat liquid-cooling parts as an assembly problem, not just a machining problem.

I am not going to claim we never miss one. We have. But the misses now happen early, in our test, instead of at the customer's line.

What we tell buyers now

If your part has an internal channel that carries liquid, ask the shop how and at what temperature they leak-test it. A cold test that passes is not the same as a part that survives a hot line.

We machine EV liquid cooling parts and fluid cavities in Shenzhen, with tolerances down to +/-0.005 mm where the drawing calls for it. More on our EV liquid cooling CNC machining.

CHX Precision Metal — precision CNC machining in Shajing, Bao'an, Shenzhen. MOQ 1 piece, prototypes 3-7 working days, batch production 7-15 days, EXW Shenzhen.