A customer in Wuhan sent back one of our optical communication housings last autumn with a complaint I did not expect. The cavity dimensions were fine — they had checked. But when they put a laser through it and ran their test, the inside of the cavity fogged up. Not scratched, not out of tolerance. Just hazy.
We had machined it clean, or so I thought. The problem turned out to be the surface finish inside the cavity. On the gauge it read inside spec, but the kind of rough that holds microscopic cutting oil even after a rinse. Under a laser, that residue outgassed and settled back on the walls. I had never seen it happen on a metal part until that batch.
The roughness number was legal and still wrong
The drawing called for a surface finish that we hit. What the drawing did not say — because the buyer did not know to write it — was that this cavity would sit in an optical path. There is a difference between a surface that measures smooth and a surface that is clean enough for optics. We learned that difference on someone else's tester.
We changed two things. We switched the finishing pass to a sharper tool with a lighter cut, and we added an ultrasonic rinse plus a bake-out before packing. Neither is exotic. Both came from that one returned part.
Cleaning is a process, not a step
I used to think cleaning was what you do at the end. On these housings it is half the work. How the part is handled between the machine and the clean bench matters — the gloves, the air, the tray it sits in. We now keep the optical cavities on a separate path from the general milling output, because a part that is fine for a bracket is not fine for a cavity that light travels through.
Not every shop wants to run that separate path. I understand why; it costs time and floor space. But if your part has an optical surface inside it, ask how the shop handles it after the cutter stops.
What we tell buyers now
If your housing has a cavity that light, fluid or a seal travels through, tell the shop what goes through it, not just the dimensions. The same cavity can be a good mechanical part and a bad optical one, and the drawing often does not say which one you need.
We machine optical communication housings and other cavity parts in Shenzhen, with tolerances down to +/-0.005 mm where the drawing calls for it. More on our optical communication housing machining.
CHX Precision Metal — precision CNC machining in Shajing, Bao'an, Shenzhen. MOQ 1 piece, prototypes 3-7 working days, batch production 7-15 days, EXW Shenzhen.
